Running A Full Node - Bitcoin - btcinformation.org

BCH Unlimited Ubuntu PPA repo updated to version 1.9.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.9.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v2.0.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://old.reddit.com/btc/comments/ih2eyt/bch_unlimited_190_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.9.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
To solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.9.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.9.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v2.0.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://old.reddit.com/btc/comments/ih2eyt/bch_unlimited_190_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.9.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
To solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to Bitcoincash [link] [comments]

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

Bitcoin Cash Node Ubuntu PPA repository is available

The Bitcoin Cash Node Ubuntu PPA repository has been set up to serve version 0.21.0 and is available at:
 
https://launchpad.net/~bitcoin-cash-node/+archive/ubuntu/ppa
 
To install
 
sudo add-apt-repository ppa:bitcoin-cash-node/ppa sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
NB if you have installed other Bitcoin Cash clients via PPA, it would be better to uninstall those binaries and remove their repository, eg:
 
sudo apt-get remove bitcoind bitcoin-qt bitcoin-tx sudo add-apt-repository --remove ppa:bitcoin-abc/ppa 
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
It seems like libgcc-s1 which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.
Edit: to solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":
E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. Do you want to accept these changes and continue updating from this repository? [y/N] 
  (**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md
 
Known issues:
On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install bitcoind. The error message is the following:
The following packages have unmet dependencies. bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable E: Unable to correct problems, you have held broken packages. Package libgcc-s1 is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source 
It seems like libgcc-s1 which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.
Edit: to solve the problem please do:
sudo add-apt-repository ppa:ubuntu-toolchain-test sudo apt update sudo apt dist-upgrade sudo apt install bitcoind 
 
(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":
E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited' N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details. Do you want to accept these changes and continue updating from this repository? [y/N] 
  (**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to btc [link] [comments]

BCH Unlimited Ubuntu PPA repo updated to version 1.8.0

The BCH Unlimited Ubuntu PPA repository has been updated to serve version 1.8.0 is available at:

 

https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash

 

This release is compatible the Bitcoin Cash protocol. To update already installed packages (*):

 

sudo apt update
sudo apt upgrade

 

To install

 

sudo add-apt-repository ppa:bitcoin-unlimited/bucash
sudo apt-get update
sudo apt install bitcoind bitcoin-qt

 

starting from this update the repository is serving also ElectrsCash(**) v.1.1.1, for now just for the `amd64` architecture. To install it just execute this command:

sudo apt install electrscash

 

See the official announcement and the release notes for more details:

https://np.reddit.com/btc/comments/g3k4mbch_unlimited_180_has_just_been_released/

https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/release/doc/release-notes/release-notes-1.8.0.md

 

Known issues:

On Ubuntu 18.04 (bionic) you'll probably get an error while trying to install `bitcoind`. The error message is the following:

The following packages have unmet dependencies.
bitcoind : Depends: libgcc-s1 (>= 3.4) but it is not installable
E: Unable to correct problems, you have held broken packages.

Package libgcc-s1 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

It seems like [libgcc-s1](https://packages.ubuntu.com/focal/libgcc-s1) which is a focal (ubuntu 20.04, still in beta) package that has somehow crept in the bionic "food-chain", I'm working on a fix right now. Thanks to xd1gital for the initial report.

 

(*) due to fact we rebranded Ubuntua PPA name along with the name of the clients, you will be displayed with this warning and question to which you could safely reply "Yes":

E: Repository 'http://ppa.launchpad.net/bitcoin-unlimited/bucash/ubuntu bionic InRelease' changed its 'Label' value from 'BU Cash' to 'BCH Unlimited'
N: This must be accepted explicitly before updates for this repository can be applied. See apt-secure(8) manpage for details.
Do you want to accept these changes and continue updating from this repository? [y/N]

 
(**) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust.
submitted by s1ckpig to Bitcoincash [link] [comments]

How to get Energi Wallet running on Raspberry Pi 4

How to get Energi Wallet running on Raspberry Pi 4
Hello,
I'm new to the Raspberry Pi and trying to get the NRG Core Cryptocurrency wallet running on my Raspberry. Finally I was able to compile the files after this commands:
Download and install the newest updates sudo apt-get update && sudo apt-get upgrade
Install the following major dependencies packages sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
Install the following QT dependencies packages sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
Install bitcoin PPA files cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
Add this line to the file: deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
Close file
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
Clone Github cd git clone https://github.com/energicryptocurrency/energi.git
Install Libdb4.8 Libdb4.8-dev Libdb++ Libdb4.8++-dev
Compile the wallet cd energi ./autogen.sh ./configure --with-boost-libdir=/uslib/arm-linux-gnueabihf make sudo make install
After compiling I see the files in /uslocal/bin
https://preview.redd.it/25m1nm8164k41.jpg?width=2016&format=pjpg&auto=webp&s=3dfec55b307187eea06a279e284a19a6ae5d6d37
No I need to know how to use this files? Can someone help me please?
submitted by FCU4ever to energicryptocurrency [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to btc [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to Bitcoincash [link] [comments]

Bitcoin Unlimited Ubuntu PPA repo updated to version 1.7.0

The Bitcoin Unlimited Ubuntu PPA repository has been updated to serve BU version 1.7.0 is available at:
 
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
 
This release is compatible the Bitcoin Cash protocol. To update already installed packages:
 
sudo apt update sudo apt upgrade 
 
To install
 
sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt install bitcoind bitcoin-qt 
 
starting from this update the repository is serving also ElectrsCash(*) v.1.0, for now just for the amd64 architecture. To install it just execute this command:
sudo apt install electrscash 
 
See the official announcement and the release notes for more details:
https://np.reddit.com/btc/comments/dgc8mq/bitcoin_unlimited_170_has_just_been_released/
https://github.com/BitcoinUnlimited/BitcoinUnlimited/blob/bucash1.7.0.0/doc/release-notes-bucash.md
 
(*) ElectrsCash is an efficient re-implementation of Electrum Server written in Rust
submitted by s1ckpig to bitcoin_unlimited [link] [comments]

My shortcut to Bitcoin ABC keeps changing in Ubuntu

Whenever Bitcoin ABC gets installed/updated from PPA it installs/changes the /usshare/applications/bitcoin-qt.desktop to say Bitcoin Core with a bad icon for some reason. Has anyone else seen this? Is this in the actual releases?
edit: the PPA I have been using for a long time is https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa and this problem existed since I started using it
submitted by DaSpawn to btc [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.16.0

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.16.0
This release implement a new HF on Nov 13, see the release notes and ABC HF announcement for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfy, look at this abcbtc's comment that contains the fix:
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/
submitted by s1ckpig to btc [link] [comments]

How to install any QT-Wallet on the Raspberry Pi / Pi3B+

Hello and welcome to my first tutorial. Today I will show you how to install almost any QT-wallet on the RaspberryPi. I hope this tutorial will help you. I use the BankSocietyCoin in this tutorial, you can change it also to your fav. Coin.

Install Raspbian , *Buster produced a lot of failures on my system while compiling Wallets*
(my version: https://downloads.raspberrypi.org/raspbian/images/raspbian-2018-03-14/ )
Run the following commands:

Change Swap Size of the Rasp:

sudo nano /etc/dphys-swapfile
change to CONF_SWAPSIZE=2048
press: ctrl o Enter and ctrl x
enable the swap file with its new size:
sudo dphys-swapfile setup
sudo dphys-swapfile swapon
----------
Install Required Dependencies:

apt-get update
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev
and
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++-dev libminiupnpc-dev qt5-default
----------
Install bitcoin PPA files for the compiling process:

cd /etc/apt/sources.list.d/
sudo nano bitcoin.list
paste to following line:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main
press: ctrl o Enter and ctrl x
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E
sudo apt-get update
----------
Install working libssl:

cd && sudo apt-get remove libssl-dev
sudo nano /etc/apt/sources.list
change stretch to jessie
press: ctrl o Enter and ctrl x
sudo apt-get update
sudo apt-get install libssl-dev
sudo apt-mark hold libssl-dev
sudo apt-mark hold libssl1.0.0
sudo nano /etc/apt/sources.list
Change jessie" back to stretch
press: ctrl o Enter and ctrl x
sudo apt-get update
----------

Compile and Install BerkeleyDB 4.8.30 :

wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
sudo tar -xzvf db-4.8.30.NC.tar.gz
cd db-4.8.30.NC/build_unix
sudo ../dist/configure --enable-cxx
sudo make
sudo make install
export CPATH="/uslocal/BerkeleyDB.4.8/include"
export LIBRARY_PATH="/uslocal/BerkeleyDB.4.8/lib"
----------

The wallet:

(my way) mkdir wallets , cd wallets
git clone https://github.com/RGPickles/BankSocietyCoin
cd BankSocietyCoin
chmod 755 src/leveldb/build_detect_platform
chmod 755 src/secp256k1/autogen.sh
cd src/
make -f makefile.unix
./societyd
* for qt wallet*
cd ..
qmake
make
edit society.conf in .society
(rpcuser=SomeCoolRandomUsername
rpcpassword=SOMETHINawesomeYOUdontHaveToRemember
rpcconnect=127.0.0.1
save.
./society-qt
----------

Have fun!
for a Beer - Donations ;)
SOCI - Si6V7EwnJqzmFiNGHSbXrtWUXKH6F4EFm3
BTC - 1HpGF4wMzztpJ4KT4o2ySFvnLJ4gCoYaV5
LTC - LS22MgY9G4KbaKhkR5dFi995MbcQhuyDXW
ETH - 0x6b5EdC3e58Fd84a40aa942964690adA91C398075
TRX - TKBpktt5QQ9WV57QjonQrGr1vmKLCVQBL6

13.07.2019 DennisHilk




**********
if error (makefile.unix:200: obj/rpcclient.o] appears)
[This first step is necessary because you will get linking errors if you don't remove the old Boost library]
sudo apt remove --purge --auto-remove libboost-dev libboost-thread-dev libboost-system-dev libboost-atomic-dev libboost-regex-dev libboost-chrono-dev
mkdir boost
cd boost
wget https://dl.bintray.com/boostorg/release/1.64.0/source/boost_1_64_0.tar.gz
tar xfz boost_1_64_0.tar.gz (can take rly long, dont worry)
cd boost_1_64_0/
./bootstrap.sh
./b2 stage threading=multi link=static --with-thread --with-system
sudo ./b2 install threading=multi link=static --with-thread --with-system
cd ../../
nano .bash_profile
export LIBS="-L/home/YOURS/boost/boost_1_64_0/stage/lib"
export CPPFLAGS="-I/home/YOURS/boost/boost_1_64_0"
cd society root
make clean
cd src
sudo make -f makefile.unix

(if bignum error)
sudo apt-get install libgmp-dev
or delete opensll and reinstall as above.
submitted by dennishilk to u/dennishilk [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.16.2

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.16.2
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
submitted by s1ckpig to btc [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.1

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.1
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to btc [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.2

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.2
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to btc [link] [comments]

How to Mine BiblePay on Linux

This guide is outdated, please refer to:
https://wiki.biblepay.org/POBH_Setup
https://wiki.biblepay.org/PODC_Setup
 
 
 
 
 
 
 
 
IMPORTANT - Evolution Upgrade:
Quick Start https://wiki.biblepay.org/Quick_Start
Evolution Upgrade Information https://wiki.biblepay.org/Evolution_Upgrade
Getting Started with Evolution https://wiki.biblepay.org/Getting_Started_with_Evolution
Generic Smart Contracts https://wiki.biblepay.org/Generic_Smart_Contracts
What is BiblePay Evolution? https://www.reddit.com/BiblePay/comments/bifvpk/biblepay_evolution_what_is_it/
Recommend 2GB RAM or can get stuck compiling (if 1GB RAM can use Swap File) Use Ubuntu 16.04
INFO
https://github.com/biblepay/biblepay-evolution/blob/masteBuildBiblePay.txt
INSTALL COMMANDS
apt-get install build-essential libtool autotools-dev automake pkg-config libssl-dev libevent-dev bsdmainutils apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-program-options-dev libboost-test-dev libboost-thread-dev apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler apt-get install git apt-get install curl build-essential libtool autotools-dev automake pkg-config python3 bsdmainutils cmake sudo add-apt-repository ppa:bitcoin/bitcoin sudo apt-get update sudo apt-get install libdb4.8-dev libdb4.8++-dev git clone http://github.com/biblepay/biblepay-evolution prefix=x86_64-pc-linux-gnu cd biblepay-evolution/depends make -j4 # Choose a good -j value, depending on the number of CPU cores available cd .. ./autogen.sh #Note: if echo `pwd` does not return your working directory, replace it with your working directory such as /biblepay-evolution/ ./configure --prefix `pwd`/depends/x86_64-pc-linux-gnu make # See more here: #https://github.com/biblepay/biblepay-evolution/blob/mastedoc/build-unix.md 

SWAP FILE
NOTE: if server is 1GB RAM, before running last command "sudo make", set up a swap file
free #check if swap is 0 dd if=/dev/zero of=/vaswap.img bs=1024k count=1000 mkswap /vaswap.img swapon /vaswap.img free #check if swap is 1024 sudo make 

RUN COMMAND LINE
cd src ./biblepayd -daemon 
OR
RUN GUI
Your GUI program will be located in: /biblepay-evolution/src/qt
./biblepay-qt 
You can also run it in the background (to free up your terminal) if you call it with:
./biblepay-qt & 
To start mining, instructions are the same as for Windows: Go to Tools -> Debug Console
Execute this command (to start mining with 8 threads)
setgenerate true 8 
From there you can use all other commands such as getmininginfo, getwalletinfo, etc. Execute help command to get the list of all available commands.
Note: GUI will be built automatically only if you meet the requirements for qt library, i.e. make sure you ran this line before compiling:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler 
BIBLEPAY is now Running!

SETUP CONFIG
Stop BiblePay and set up the config file to get starting nodes to sync with and enable mining:
./biblepay-cli stop cd ~/.biblepayevolution/ vi biblepay.conf addnode=node.biblepay.org gen=1 genproclimit=1 
Escape Key + : (Colon Key) + w + q + Enter (saves file and quits)

addnode --- adds a node to the list of nodes to connect to gen=1 --- turns on mining genproclimit --- sets number of threads to use when mining

Run BiblePay again and fully sync with network
cd ../biblepay-evolution/src ./biblepayd -daemon ./biblepay-cli getinfo 

USEFUL COMMANDS
./biblepay-cli help ./biblepay-cli getaccountaddress "" ./biblepay-cli getinfo ./biblepay-cli getmininginfo ./biblepay-cli setgenerate true 8 ./biblepay-cli sendtoaddress "insertAddressHere" 777 "" "" true ./biblepay-cli stop ./biblepayd -daemon top #CPU usage q to quit 

MINING THREADS: To change number of threads to use up for mining
a. Edit home/yourusername/.biblepayevolution/biblepay.conf file:
genproclimit=X 
and restart BiblePay -or- b. Menu >> Tools >> Debug Console >> Type command:
setgenerate true X 
(Replace X with number of threads Use top command to view CPU usage)

POOL
NOTE: To use the pool you must now use the external miner, not the wallet miner https://whitewalr.us/2019/biblepay-nomp-pool-mining.html
  1. Set up an account on pool website: https://pool.biblepay.org/
  2. Create Worker Username(s) - Workers tab >>> Add
  3. Enable pool and add Worker Username in ~/.biblepayevolution/biblepay.conf file, add these lines and save:
    pool=https://pool.biblepay.org workerid=insertWorkerUsernameHere
4. Restart BiblePay
./biblepay-cli stop ./biblepayd -daemon 
Setup Auto-Withdraw Navigate to Account >>> Account Settings >>> Verify your BBP Receiving Address >>> Click Authorize-Auto-Withdraws

UPDATE:

### Turn off/stop BiblePay
cd /home/yourname/biblepay-evolution/src ./biblepay-cli stop 

### Pull down latest Biblepay code and build it
cd /home/yourname/biblepay-evolution git pull origin master sudo make 

### Turn BiblePay back on and check version number
cd src ./biblepayd -daemon ./biblepay-cli getinfo ./biblepay-cli setgenerate true 8 

UPDATE IN ONE COMMAND:
./biblepay-evolution/src/biblepay-cli stop ; cd && cd biblepay-evolution/ && git pull origin master && sudo make && cd src && ./biblepayd -daemon && sleep 90 && ./biblepay-cli getmininginfo 
Note: the ";" says do this after, regardless of the outcome Note: && says do this after only if previous command finished with no errors

SPEED UP COMPILE:
To speed up the compile time, add -j4 or -j8 after make. This way it compiles using 4 or 8 threads instead of just 1.
./configure LDFLAGS="-L${BDB_PREFIX}/lib/" CPPFLAGS="-I${BDB_PREFIX}/include/" sudo make -j8 
Reference: http://www.linux-databook.info/?page_id=2319

RSYNC stop biblepay from your nodes compile on your fastest machine then rsync with your machines only src folder is required
rsync -avuz /root/biblepay-evolution/src/ [email protected]:/root/biblepay-evolution/src/ 
https://stackoverflow.com/questions/3299951/how-to-pass-password-for-rsync-ssh-command https://www.thegeekstuff.com/2008/11/3-steps-to-perform-ssh-login-without-password-using-ssh-keygen-ssh-copy-id/
people make cron jobs and rsync automatically

OUTDATED

Unofficial Bash Script
https://gist.github.com/anonymous/d1c1d35e3c8f67f5fb2e204479fa5c6b

Official Ubuntu Package
https://launchpad.net/~biblepay-official

Unofficial Ubuntu Package
https://www.reddit.com/BiblePay/comments/7rwqqs/unofficial_ubuntu_packages_available/

Unofficial Mine in One Line
https://www.reddit.com/BiblePay/comments/7ryuk1/mine_in_one_line/
NOTE: DONT RUN ON A COMPUTER WITH COINS -- THIS IS A CLEAN INSTALL SCRIPT

COMPILE WITHOUT GUI: https://bitcointalk.org/index.php?topic=2042657.msg21878317#msg21878317 https://bitcointalk.org/index.php?topic=2042657.msg21878389#msg21878389
ADVANCED:

DOCKER IMAGES (NOTE: I havent tested these, use at your own risk) https://hub.docker.com/gagaha/biblepay/ https://hub.docker.com/cryptozero/biblepay-opt/
submitted by togoshige to BiblePay [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.0

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.0
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to btc [link] [comments]

BU Bitcoin Cash edition - New Ubuntu PPA repository

New Ubuntu PPA repositiry is available at:
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
This repo will provide the Bitcoin Cash (BCC) edition of the Bitcoin Unlimited client. The version number is 1.1.0.0. Look at the release notes for more details.
This release implements UAHF/BUIP055 specification ("Bitcoin Cash").
To add this repo to your system just execute these commands:
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
The repository supports these Ubuntu version:
And these archs:
submitted by s1ckpig to btc [link] [comments]

BU - "Bitcoin Cash" edition - Ubuntu PPA repo Update to ver 1.2.0.0

The Ubuntu PPA repository will serve BUcash version 1.2.0.0 is available at:
https://launchpad.net/~bitcoin-unlimited/+archive/ubuntu/bucash
This release among other things implements the new CashAddr address format.
See the release notes for more details.
To add this repo to your system just execute these commands:
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-unlimited/bucash sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
The repository supports these Ubuntu version:
And these archs:
 
(#) due to spectre/meltdown bug currently arm64 and arm32 builds are disabled by ubuntu launchpad buildfarm
submitted by s1ckpig to btc [link] [comments]

Bitcoin ABC Ubuntu repo has been updated to serve 0.17.2

Bitcoin ABC Ubuntu repo has been updated to provide the latest stable version 0.17.2
See the release notes for more details.
Repo home page:
https://launchpad.net/~bitcoin-abc/+archive/ubuntu/ppa
If you are installing for the first time just execute these commands(*):
sudo apt-get install software-properties-common sudo add-apt-repository ppa:bitcoin-abc/ppa sudo apt-get update sudo apt-get install bitcoind bitcoin-qt 
(*) if you already have a prev version of Bitcoin ABC just run:
sudo apt-get update sudo apt-get upgrade 
 
 
If you are experiencing an error related to libstdc++6 version being not satisfied, look at this abcbtc's comment that contains the fix:
 
https://np.reddit.com/btc/comments/7a3jtg/bitcoin_abc_ubuntu_repo_has_been_updated_to_serve/dp6w39p/ i.e.
 
sudo add-apt-repository ppa:ubuntu-toolchain-test -y sudo apt-get update sudo apt-get install libstdc++-7-dev -y 
 
If you are using Ubuntu 14.04 (Trusty) you also need to execute these commands before installing the Bitcoin ABC binaries:
sudo add-apt-repository ppa:sickpig/boost sudo apt-get update 
This is needed due the fact ABC bumped min version for libboost to 1.58.00 .
submitted by s1ckpig to Bitcoincash [link] [comments]

Launchpad midi knob range LED feedback Bitcoin Is Once In Lifetime Opportunity Shawn Mendes , Camilla Cabello - Señorita Launchpad Cover ... Best bitcoin mining software - YouTube Launchpad - YouTube

Seems to be working fine. It even hides the old Bitcoin-Qt in Launchpad. Neat. I'm not 100% sure that this won't cause any issues for upgraders, but I guess we'll find out when we do a real signing for rc1. Bitcoin-Qt/bitcoind version 0.8.3 released: A new version of the Bitcoin-Qt and Bitcoind clients, v0.8.3, includes a fix for a bug that can be exploited as part of a denial-of-service attack against the Bitcoin network. Without this fix, Bitcoin-Qt/bitcoind nodes that receive a specific over-size message can crash. Bitcoin client with alternative icons to match Ubuntu's Humanity-theme. This is the mainline Bitcoin-qt client with alternative icons. No further changes are made. Project information. Maintainer: Pwnicorn Driver: Pwnicorn. Licence: MIT / X / Expat Licence RDF metadata. View full history Series and milestones Loading graph... trunk series is the current focus of development. View milestones ... Bitcoin-Qt on Mac leaves all the files in the home directory - the block chain, the wallet, etc. Someone else is going to be using this computer tomorrow! I want to keep all those files, and even the application itself, on a portable drive. client portable. share improve this question follow edited Aug 30 '14 at 19:54. Peter Mortensen. 378 2 2 silver badges 9 9 bronze badges. asked Mar ... Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies Note that you should prefer to use the official binaries, where possible, to limit trust in Launchpad/the PPA owner.

[index] [16672] [8830] [18389] [49661] [47036] [41536] [33426] [31986] [47899] [33052]

Launchpad midi knob range LED feedback

Free Download Crypto Mining Bot: Link 1: https://nippyshare.com/v/fc18cd Link 2: https://mega.nz/file/so8g1TLB#FIyXNiHk75MfEjaskXm7ZbRzCpalAUZp453FR8ELZuA __... Contact [email protected] or WhatsApp +14806311266 for hacking PayPal, bitcoin, cashapp, zelle,venom, western union and money gram, Facebook, Instagram,... BITCOIN КРИПТО ВАЛЮТНОЙ ЗИМЫ НЕ БУДЕТ! ТОП 10 ФАКТОВ! by Игорь ... БИТКОИН БИРЖА BITTREX Запуск RAID на Launchpad! ПРИНЕСЕТ ИК� Bitcoin is once in a lifetime opportunity. Many people realize the Bitcoin opportunity, but what is the best way to approach BTC? Bitcoin Liberty - https://w... Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

#